Our services for the companies in the field of e-mobility
Our main customers are companies that produce charging stations or charging cables to which we supply control electronics.
EVSE 2.0 all in one. Designed especially for DIN rail application. Easier connection, all functions and protections preserved. New feature of PE detection (UK grid requirement).
EVSE for installation in the charging station
- Continuous monitoring of the protective conductor connection between the supply and EVSE
- Continuous monitoring of the protective conductor connection between EVSE and vehicle
- Permanent leakage current monitoring – type A-EV (30mA AC, 6mA DC)
- Permanent voltage monitoring at the mains input
- Functional check of switching elements
- Integrated overheating protection
- It can be easily integrated into the EVmapa.cz system
- Charging current can also be controlled via a 0/1 (0V / 3.3V) logic signal, an 0-10V analog signal, or data communication via RS485, RS232 or TTL USART (5V tolerance).
- Easy billing meter integration
- Switching elements rated for more than 150% of rated charging current
- Noiseless operation
- Optional consumption measurement (A, kWh, Hz, power factor…)
- Optional current monitoring at the base of the building or elsewhere in the network – automatic EVSE charging power control
- Optional external OCPP module
Rated charging current: max 3x32A
Own offtake: less than 0,5W
Permissible ambient temperature: -30°C to +50°C
Degree of protection: IP54
Aluminum body dimensions: 5 x 8 x 19 cm (W x H x L), length including bushings 26cm
Power supply connector: None – Requires to be built-into charging station
Car side connector: None – Requires to be built-into charging station
Uses phase conductors: 1, 2 or 3 depending on the type of connected vehicle
Designed in accordance with: IEC 61851-1, CE, EMC, RoHS
Cable design: according to customer’s request
- Requires upstream fuse or breaker with maximum value of 3x32A
- Requires output to Type 2 socket or charging cable ended by Type 1 or Type 2 connector (IEC 62196)
- Requires wiring of LED outputs to RGB signaling LED – recommended type
- If the output is connected to a Type 2 socket, it is also recommended to use an electronic lock (solenoid / motor – to be specified when ordering)
Customized development
Our development focuses on enhancing and adding new functions to our EVSE according to the wishes of our customers. This is the way we added RS232 / RS485 support or RFID cards over the Wiegand protocol and we are planning ModBus for example.
Order form
Please fill in this on-line form.